99
JUMP LEAD STARTING
EMERGENCY & BREAK DOWN ASSISTANCE
07
•
Also connect the booster batteries
by using another cable for inter
connection.
•
Connect the jumper cables in the
following sequence.
•
Positive terminal of the discharge
battery to Positive terminal of the
booster battery.
•
Negative terminal of the booster
battery to the unpainted metal part
of the discharge vehicle which is
away from
the discharge battery.
WARNING
Do not connect –ve terminal of jump
start battery to –ve terminal of
discharged battery. This may lead
to an explosion.
•
After connecting the cables, start
the engine of vehicle having booster
batteries.
•
Raise the engine speed of the ve-
hicle slightly and then start engine
of the discharge battery vehicle.
•
After engine is started disconnect
the cable in the reverse sequence
of connection.
NOTE
Do not remove the battery cables
from the terminals while the engine
is running.
As far as possible avoid jump start-
ing as this may damage the ECU.
Summary of Contents for INDICA VISTA
