Tascam X-48, Owner'S Manual

Page: 48 / 68

Recorder
• Click the Windows menu and select the Settings window.
• Click on the Sync tab and click the BNC In or BNC Out submenu. Choose a setting
from the list.
Front Panel Operation
• Press
the SYNC button. Press the up/down buttons to select
BNC Clock In
or
BNC Clock Out
and press CHNG .
• Use the up/down buttons to select a setting and press Enter.
BNC Word Clock Output Polarity
This setting allows the Word Clock signal output phase to be reversed. This may be
necessary in large systems or with long cable runs.
Mouse/Keyboard Operation
•
Click the Windows menu and select the Settings window.
• Click on the Sync tab and check the box labeled Invert Word Out Polarity.
Front Panel Operation
• Press
the SYNC button. Press the up/down buttons to select
Word Out
Polarity
and press CHNG .
• Use the up/down buttons to select either Normal or Inverted and press Enter.
Video Clock Frame-Edge Resolve
Video Clock in the X-48 can be used to define the frame edge of incoming and generated
timecode for stability and repeatability. (But not as a sample clock source, see
Requirements
above.) To enable video clock:
Mouse/Keyboard Operation
•
Click the Windows menu, select the Settings window and click the Sync tab.
• Check the box labeled Resolve to Video In in the Time Code area .
Front Panel Operation
• Press
the SYNC button. Press the up/down buttons to select
Resolve to Video
In
and press CHNG .
• Press the Up/Down buttons to select
On
and press Enter.
Frame Rate
The X-48 syncs to any frame rate of SMPTE timecode:
48