Configuration
Front Panel Operation
• Press
the
SYS
button
•
Press the Up/Down buttons to select
Midi Device ID
and press
CHNG
•
Select an ID from the list and press
ENTER
Sony 9-Pin
This section explains how to control the X-48 using Sony 9-pin, also called P2 or RS-422.
To access these settings:
Mouse/Keyboard Operation
•
Click the Windows menu and select
Settings
• Click
the
Prefs
tab
•
There are three settings under the
Sony 9-pin
heading:
Track Arm
,
Punch Delay
and
Chase Control
, explained below.
Front Panel Operation
• Press
the
PREF
button
•
Press the Up/Down buttons to select
P2 Track Arm, P2 Punch Delay
or
P2 Chase Control
and press
CHNG
Track Arm
– Setting it to
Digital/Console
allows you to arm tracks over 9-pin. Set this to
Local
if you don't want to arm tracks this way.
Punch Delay
– You can set the punch-in delay from off to 6 frames. This is used when it is
necessary for the X-48 to emulate an older video deck to match what is expected by the
controller.
Chase Control
– Choose LTC (SMPTE) or MTC (MIDI) here, or it can be disabled.
Video Reference
When working in video, use video blackburst to align your audio playback and time code to
exactly a frame edge. To switch on video reference:
Mouse/Keyboard Operation
•
Click the Windows menu and choose
Settings
• Select
the
Sync
tab
•
Check the box labeled Resolve to Video In
Front Panel Operation
• Press
the
SYNC
button
25
Summary of Contents for X-48
Page 1: ...D00871101A X 48 48 Track Digital Audio Workstation OWNER S MANUAL...
Page 65: ...65 Notes...
Page 66: ...Notes 66...
Page 67: ...Notes 67...
