Recorder
Undo/Redo
Unlike tape machines, you can undo a recording pass and then put it back with redo.
Undo/redo is only available from the mouse/keyboard interface.
Mouse/Keyboard Operation (only)
•
Click the Edit menu and choose
Undo
or press Control-Z on the keyboard.
Metering
Several metering parameters are available:
•
Peak Hold
displays the highest signal level achieved, either for a few seconds or
until cleared.
• Meters
can
be
Pre-fader
or
Post-fader
(not applicable in Mixer Bypass mode). This
means that the meters show the signal level either before or after the signal hits the
mixer interface.
•
(GUI only) you can
View Masters
to see the signal level for the group and aux
channels.
Mouse/Keyboard Operation
•
Click on the Meter button
if meters are not displayed at the top of the
screen.
•
Click on the Options menu and select the
Meters
submenu. From this submenu you
can select
Peak Hold
and
Clear Overloads
.
•
Click on Options > Meters > Mode to select
Pre-Fader
or
Post-Fader
metering.
•
Click on Options > Meters > View Masters to see the group and aux master levels, or
click on the on-screen meters themselves.
•
To set the amount of time that peak values stay on the meters, click Windows and
select Settings. Click on the
Prefs
tab and change the
Clear Overloads
pulldown to
change the interval to 1 second, 5 seconds, 30 seconds or Hold (infinite).
GUI Meter Display
You can display the meters by clicking the bargraph icon in the center of the screen
or by pressing
1
on the keyboard.
Front Panel Operation
• Press
the
PREF
button and scroll to the
Meters
sub-menu and press
CHNG.
40
Summary of Contents for X-48
Page 1: ...D00871101A X 48 48 Track Digital Audio Workstation OWNER S MANUAL...
Page 65: ...65 Notes...
Page 66: ...Notes 66...
Page 67: ...Notes 67...
