background image

IMPORTANT SAFETY INSTRUCTIONS

TASCAM  US-1641

 

 

1

  Read these instructions.

 

2

  Keep these instructions.

 

3

  Heed all warnings.

 

4

  Follow all instructions.

 

5

  Do not use this apparatus near water.

 

6

  Clean only with dry cloth.

 

7

  Do  not  block  any  ventilation  openings.  Install  in 

accordance with the manufacturer's instructions.

 

8

  Do  not  install  near  any  heat  sources  such  as 

radiators,  heat  registers,  stoves,  or  other  apparatus 
(including amplifiers) that produce heat.

 

9

  Do  not  defeat  the  safety  purpose  of  the  polarized 

or  grounding-type  plug.  A  polarized  plug  has  two 
blades  with  one  wider  than  the  other.  A  grounding 
type  plug  has  two  blades  and  a  third  grounding 
prong.  The  wide  blade  or  the  third  prong  are 
provided  for  your  safety.  If  the  provided  plug  does 
not  fit  into  your  outlet,  consult  an  electrician  for 
replacement of the obsolete outlet.

 

10

  Protect  the  power  cord  from  being  walked  on 

or  pinched  par ticularly  at  plugs,  convenience 
receptacles,  and  the  point  where  they  exit  from  the 
apparatus.

 

11

  Only  use  attachments/accessories  specified  by  the 

manufacturer.

 

12

  Use  only  with  the  cart,  stand,  tripod,  bracket,  or 

table specified by the manufacturer, or sold with the 
apparatus.  When  a  cart  is  used,  use  caution  when 
moving  the  cart/apparatus  combination  to  avoid 
injury from tip-over.

 

13

  Unplug  this  apparatus  during  lightning  storms  or 

when unused for long periods of time.

 

14

  Refer  all  servicing  to  qualified  service  personnel. 

Servicing  is  required  when  the  apparatus  has  been 
damaged in any way, such as power-supply cord or 
plug  is  damaged,  liquid  has  been  spilled  or  objects 
have  fallen  into  the  apparatus,  the  apparatus  has 
been exposed to rain or moisture, does not operate 
normally, or has been dropped.

Do not expose this apparatus to drips or splashes.
Do  not  place  any  objects  filled  with  liquids,  such  as 
vases, on the apparatus.
Do not install this apparatus in a confined space such 
as a book case or similar unit.
The apparatus should be located close enough to the 
AC outlet so that you can easily grasp the power cord 
plug at any time.
An  apparatus  with  Class  I  construction  shall  be 
connected to an AC outlet with a protective grounding 
connection.
Batteries  (battery  pack  or  batteries  installed)  should 
not  be  exposed  to  excessive  heat  such  as  sunshine, 
fire or the like.
Excessive sound pressure from earphones and head-
phones can cause hearing loss.
The  apparatus  draws  nominal  non-operating  power 
from  the  AC  outlet  with  its  STANDBY/ON  in  the 
Standby position.


Summary of Contents for US-1641





























Reviews: