background image

 

TASCAM  US-1641

The exclamation point within an equilateral triangle is intended to alert the user to 

the  presence  of  important  operating  and  maintenance  (servicing)  instructions  in 

the literature accompanying the appliance.

The lightning flash with arrowhead symbol, within equilateral triangle, is intended 

to  alert  the  user  to  the  presence  of  uninsulated  “dangerous  voltage”  within  the 

product’s  enclosure  that  may  be  of  sufficient  magnitude  to  constitute  a  risk  of 

electric shock to persons.

CAUTION:  TO  REDUCE  THE  RISK  OF  ELECTRIC  SHOCK,  DO  NOT  REMOVE  

COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING 

TO QUALIFIED SERVICE PERSONNEL.

WARNING: TO PREVENT FIRE OR 

SHOCK HAZARD, DO NOT EXPOSE THIS 

APPLIANCE TO RAIN OR MOISTURE.

This  appliance  has  a  serial  number 

located on the rear panel. Please record 

the  model  number  and  serial  number 

and retain them for your records.

Model number
Serial number

For the customers in Europe

WARNING

T h i s  i s  a  C l a s s  A  p r o d u c t .  I n  a  d o m e s t i c 
e nv i r o n m e n t ,  t h i s  p r o d u c t  m ay  c a u s e  r a d i o 
interference in which case the user may be required 
to take adequate measures.

Pour les utilisateurs en Europe

AVERTISSEMENT

I l  s'a g i t  d'u n  p r o d u i t  d e  C l a s s e  A .  D a n s  u n 
environnement  domestique,  cet  appareil  peut 
provoquer  des  interférences  radio,  dans  ce  cas 
l'utilisateur  peut  être  amené  à  prendre  des  mesures 
appropriées.

Für Kunden in Europa

Warnung

Dies ist eine Einrichtung, welche die Funk-Entstörung 
nach  Klasse  A  besitzt.  Diese  Einrichtung  kann  im 
Wohnbereich  Funkstörungen  versursachen;  in 
diesem  Fall  kann  vom  Betrieber  verlang  werden, 
angemessene Maßnahmen durchzuführen und dafür 
aufzukommen.

TO THE USER

This  equipment  has  been  tested  and  found  to 
comply  with  the  limits  for  a  Class  A  digital  device, 
pursuant  to  Part  15  of  the  FCC  Rules.  These  limits 
are  designed  to  provide  reasonable  protection 
against  harmful  interference  when  the  equipment 
is  operated  in  a  commercial  environment.  This 
equipment  generates,  uses,  and  can  radiate  radio 
frequency  energy  and,  if  not  installed  and  used  in 
accordance  with  the  instruction  manual,  may  cause 
harmful interference to radio communications.
Operation  of  this  equipment  in  a  residential  area  is 
likely to cause harmful interference in which case the 
user will be required to correct the interference at his 
own expense.

CAUTION

Changes  or  modifications  to  this  equipment  not 
expressly  approved  by  TE AC  CORPOR ATION 
for  compliance  could  void  the  user's  authority  to 
operate this equipment.

For U.S.A.

CE Marking Information
a)  Applicable electromagnetic environment: E4
b) Peak inrush current: 8.0 A

In North America use only on 120V supply.

IMPORTANT SAFETY PRECAUTIONS

Summary of Contents for US-1641





























Reviews: