12
TASCAM HD-R1
4–Recording
7 Use the
SHUTTLE/DATA
wheel to select
Channels
, and press the
ENTER
key.
Set the record channel mode with this item.
8 Use the
SHUTTLE/DATA
wheel to select the
channel mode, and press the
ENTER
key.
Stereo: records in stereo
•
Mono Right: records R channel input in mono
•
Mono Left: records L channel input in mono
•
9 Use the
SHUTTLE/DATA
wheel to select
Input
Source
, and press the
ENTER
key.
Set the record input source with this item.
10 Use the
SHUTTLE/DATA
wheel to select the record
input source, and press the
ENTER
key.
Analog/Mic: sets the input source to the MIC/LINE
•
INPUTS (XLR, RCA or Euro connectors) on the rear
panel
S/PDIF: sets the input source to the DIGITAL IN jack
•
on the rear panel
NOTE
If Analog/Mic is selected, the switches on the rear panel
also need to be set. See step 13 below.
11 As necessary, conduct other settings related to
recording.
See “Record settings” in the Owner’s Manual for
more details about those items.
12 When setting is completed, press the
MENU
key
to return to the Home Screen.
13 If
Analog/Mic
was selected in procedure
10 above, set the switches on the rear panel
according to the analog input used as follows.
When using XLR inputs:
• Set the
INPUT
switch to
XLR
.
• Set the
L INPUT
and
R INPUT
switches to
0
or
−20
.
If the input level is too high, use the −20 setting,
which engages a 20 dB pad.
• If a condenser mic that re48V phantom
power is connected set the
PHANTOM
switch to
ON
.
When using the Euroblock:
• Set the
INPUT
switch to
TRMNL
When using the RCA INPUT:
• Set the
INPUT
switch to
XLR.
• Set the
L INPUT
and
R INPUT
switches to
RCA
.