![background image](http://html.mh-extra.com/html/tascam/dr-44wl/dr-44wl_owners-manual_820204007.webp)
TASCAM DR-44WL
7
NOTE
• When both batteries are installed and the AC
adaptor is connected, power will be supplied
from the AC adaptor.
• The AC adapter for the unit includes two
types of outlet plugs. Attach the type of plug
that matches the power outlet that you are
using.
Changing the outlet plug
$
%
2
1
5
3
4
1
Move the latch on the AC adapter in the
direction of the arrow.
2
Pull off the outlet plug.
3
Replace it with the other outlet plug (A or B).
4
Move the latch on the AC adapter in the
direction of the arrow again.
5
Attach the outlet plug to the AC adapter.
CAUTION
Do not use the adapter if there is anything
abnormal about the plug after changing
it. Use when the plug is abnormal could
cause fire or electric shock. Contact the store
where you purchased this unit or a TASCAM
customer support service to request repair.
Starting up the unit
When the unit is turned off (standby state), slide
the
HOLD
/
switch in the
direction and,
when
TASCAM DR-44WL
(start-up screen) is displayed,
release the switch.
The Home Screen appears when the unit starts up.
Selecting the language
You can change the language shown on the display.
The first time you turn the unit on after purchasing
it, the
LANGUAGE
screen will open. You can set the
language used on this screen. You can also change
this setting with the
SYSTEM
screen
LANGUAGE
item.
1. Turn the wheel to move the cursor and select
the language.
2. After making the selection, press the
ENTER/
MARK
button to confirm it.
If you accidentally select the
wrong language
Slide the
HOLD/
switch to turn the power off.
Then, slide the
HOLD/
switch while pressing
and holding the
MENU
button to turn the unit on
again.
The language selection menu where you can set the
language appears.
Setting the built-in clock
When the unit is started up for the first time (or after
being left without batteries), the
DATE/TIME
screen
appears before the start-up screen to allow the date
and time to be set.
Use the
.
/
/
button and the wheel to enter
the date and time, and press the
ENTER/MARK
button to set them.
Shutting down
While the unit is turned on, slide the
HOLD/
switch of the left side panel in the
direction
and, when
TASCAM DR-44WL shutting down
appears, release the switch.
The power turns off in a few seconds.
Connecting monitoring devices
and headphones
To listen with headphones, connect them to the
/
LINE OUT
jack.
To listen with an external monitoring system
(powered monitor speakers or an amplifier and
speakers), connect it to the
/LINE OUT
jack.
Headphones
Powered monitor speakers
or
an amplifier and speakers
Basic menu operation
procedures
1. Press the
MENU
button to open the
MENU
screen.
2. Use the wheel to select (highlight) one of the
menu items, and then press the
ENTER/MARK
button to go to the desired setting screen.
3. Use the wheel to select (highlight) an item to
set.
4. Press the
ENTER/MARK
button or
/
button
to move the cursor to the right and highlight
the setting value.
5. Use the wheel to change the setting.
6. When setting a different item in the same
menu, press the
ENTER/MARK
button or
.
to move the cursor to the left.
7. Repeat Steps 3. to 6. as necessary to set other
items.
8. When finished, press the
8
/HOME
button to
return to the Home Screen.
Menu structure
MENU
MODE
Select recording or
playback mode
REC SETTING
Set for recording
AUTO FUNCTION
Convenient
functions for
recorded files
BROWSE
(only when the 4CH mode
is selected)
SONG
(only when the MTR mode
is selected)
Operate files and
folders in the SD
card
TOOLS
Set other convenient
functions
REVERB
Set reverb effects
POWER/DISPLAY
Set the power
supply and the
display
SYSTEM
System settings of
the unit