9 – Specifications : Messages and troubleshooting
132
TASCAM DM-4800
User’s Manual
✔
OK to Overwrite Snapshot
Bank a-bbb
Press ENTER to confirm,
or a cursor key to cancel.
Confirmation before overwriting a snapshot library entry.
✔
OK to Overwrite Transport Map?
Press ENTER to confirm,
or a cursor key to cancel.
Confirmation shown when replacing the current transport control map.
✔
OK to Overwrite xxx Library
BANK a-bbb from Cgy?
Press ENTER to confirm,
or a cursor key to cancel.
Confirmation before overwriting a gate or compressor/expander or EQ library item (xxx)
from the selected channel (y).
✖
Operation failure.
Press ENTER to continue.
Something has gone wrong with an operation involving the CF card. Try again with
another card.
✔
Paste Buffer data to Chx?
Press ENTER to confirm,
or a cursor key to cancel.
Confirmation shown before pasting copied configuration data to a channel.
✔
Paste Ch2 Automation configuration.
Confirmation shown before pasting copied automation configuration data to a channel.
✔
Performing delete…
Automation File Delete.
●
Performing Keep...
An automation keep operation is in progress.
✖
Please set cascade on/off from
the cascade master machine.
Press ENTER to continue.
An attempt has been made to break the cascade connection from the slave.
✔
Program Change Table
OK to perform Batch Setup?
Press ENTER to confirm,
or a cursor key to cancel.
Confirmation shown before making a batch change to the Program Change table.
✔
Project data and
resume data are different.
The project data is loaded
ENTER key : from internal memory.
CURSOR key : from CF card.
Shown on power-up. Data has been changed since the project was saved; should this
changed data be loaded?
●
Project is not on CF card.
Shown if a referenced project is not actually on the CF card.
●
Real time control of
common MIDI Control Change
parameters
Press ENTER to continue
Information on external control.
✔
Re-assign fader (mute) group?
Press ENTER to confirm,
or a cursor key to cancel.
Confirmation when changing a setting.
✔
Re-assign fader grouping layer?
Press ENTER to confirm,
or a cursor key to cancel.
Confirmation when re-assigning a grouping layer master.
✔
Re-assign fader grouping?
Press ENTER to confirm,
or a cursor key to cancel.
Confirmation when re-assigning a fader group master.
●
Re-building current Automation Data
+----------------+
≠
#### 20%
≠
+----------------+
Popup message shown when timecode is stopped, and timecode data is being written.
✖
Recall Automation data?
Current data will be erased.
Press ENTER to confirm,
or a cursor key to cancel.
The recall of stored automation data will overwrite the data currently in memory.
Action
Message
Meaning
Table 9.1: Popup messages (continued)
