background image

TASCAM DA-6400/DA-6400dp

IMPORTANT SAFETY PRECAUTIONS

The exclamation point within an equilateral triangle is intended to alert the user to the 

presence of important operating and maintenance (servicing) instructions in the litera-

ture accompanying the appliance.

The lightning flash with arrowhead symbol, within equilateral triangle, is intended to alert 

the user to the presence of uninsulated “dangerous voltage” within the product’s enclo-

sure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR 

BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE 

PERSONNEL.

WARNING: TO PREVENT FIRE OR 

SHOCK HAZARD, DO NOT EXPOSE 

THIS APPLIANCE TO RAIN OR 

MOISTURE.

This device complies with Part 15 of FCC Rules. Operation 
is subject to the following two conditions: 

1) This device may not cause harmful interference, and
2) This device must accept any interference received, 

including interference that may cause undesired 

operation.

INFORMATION TO THE USER
This equipment has been tested and found to comply 
with the limits for a Class A digital device, pursuant to Part 
15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference when 
the equipment is operated in a commercial environment. 
This equipment generates, uses, and can radiate radio 
frequency energy and, if not installed and used in accor-
dance with the instruction manual, may cause harmful 
interference to radio communications.
Operation of this equipment in a residential area is like-
ly to cause harmful interference in which case the user 
will be required to correct the interference at his own 
expense.

CAUTION

Changes or modifications to this equipment not expressly 
approved by TEAC CORPORATION for compliance could 
void the user's authority to operate this equipment.

For U.S.A.

IN USA/CANADA, USE ONLY ON 120 V SUPPLY.

For Canada

THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN 

ICES-003.
CET APPAREIL NUMERIQUE DE LA CLASSE A EST CONFORME A 

LA NORME NMB-003 DU CANADA.

DECLARATION OF CONFORMITY

We, TEAC EUROPE GmbH. Bahnstrasse 12, 65205 
Wiesbaden-Erbenheim, Germany declare in own 
responsibility, the TEAC product described in this 
manual is in compliance with the corresponding 
technical standards.

CE Marking Information

a)  Applicable electromagnetic environment: E4
b)  The average half-cycle r.m.s. inrush current
 

 

1. On initial switch-on: 2.91 Arms

  2. After a supply interruption of 5s: 0.15 Arms

For the customers in Europe

WARNING
This is a Class A product. In a domestic environment, this 
product may cause radio interference in which case the 
user may be required to take adequate measures.

Pour les utilisateurs en Europe

AVERTISSEMENT
Il s'agit d'un produit de Classe A. Dans un environnement 
d o m e s t i q u e,  ce t  a p p a re i l  p e u t  p rovo q u e r  d e s 
interférences radio, dans ce cas l'utilisateur peut être 
amené à prendre des mesures appropriées.

Für Kunden in Europa

Warnung
Dies ist eine Einrichtung, welche die Funk-Entstörung 
nach Klasse A besitzt. Diese Einrichtung kann im 
Wohnbereich Funkstörungen versursachen; in diesem 
Fall kann vom Betrieber verlang werden, angemessene 
Maßnahmen durchzuführen und dafür aufzukommen.

Summary of Contents for DA-6400

































































Reviews: