For Testing banks with Manual ON / OFF commands:
Press ENTER key, the cursor will start blinking. Use
keys to select
the specific bank/s that are healthy and use
key to turn ON and use
key to turn OFF that capacitor banks.
To come out of Manual ON/OFF edit mode, press ENTER key so that
cursor stops blinking.
…continued.
Edit Parameters:
This mode is used to carry out system settings. In this mode, various
system settings can be carried out. To do the same, use the
keys
and select the type of parameters to be edited. The types of parameters
that can be edited are:
General & I/O
: For general settings.
System
: For TPF-56 system related settings.
Fault
: Fault settings.
Step
: Capacitor bank step settings.
Communication
: Communication parameters.
Utilization counter
: Bank operations utilization counters.
After selecting the type, press ENTER to enter the sub-menu of that
specific type.
The details of these sub-menus for every type is given further.
You can edit all these sub-menu settings by using the ENTER,
,
,
,
and
keys
To come out of the sub-menu press MODE key once.
To store the edited parameters permanently, press MEMORY when you
are either in the Edit Parameters or any sub-menu area.
To come out of Edit Parameters without saving the changes, press MODE
key again.
Intelligent Power Factor Controller TPF-56
30 of 56
Version 1.1.5 22
nd
March, 2016
