NOTE
These instructions do not purport to cover all details or
variations in equipment, nor to provide for every possible
contingency to be met in connection with installation,
operation or maintenance.
Should further information be desired or should particular
problems arise which are not covered sufficiently for the
purchasers purposes, the matter should be referred to our
office.
The contents of this instruction Manual shall not become
part of or modify any prior or existing agreement or
relationship. Any statements contained herein do not create
new warranties or modify the existing warranty.
The reproduction, transmission or use of this
document or its contents is not permitted
without express written authority. Offenders
will be liable for damages. All rights are
reserved.
Intelligent Power Factor Controller TPF-56
CAUTIONS:
1. There are High Voltages associated with this Unit. So, take appropriate
precautions.
2. To be installed & commissioned by a technically qualified person only.
3. Make sure that the discharge time set in the controller matches
the capacitor discharge time!
4. This Automatic Power Factor Controller (APFC), TPF-56, is to be used
indoor only.
5. Make sure that the Capacitor Bank Discharge Time set in the PF
Controller matches with the actual Capacitor Bank Discharge Time.
6. This User Manual is applicable to TPF-56 Unit with Firmware
Version 1.0.7 as on 25 JAN, 2016.
Because of continuous improvements
carried out by TAS PowerTek in their
Product’s Features and Specifications, the Product as well as the
Content of the User
Manual is likely to get updated without any prior notice.
Therefore, please always refer to the User Manual supplied to customer along with
the Product, at the time of product dispatch
.
!
2 of 56
Version 1.1.5 22
nd
March, 2016
