TARGA TM-2100
English
2
Intended Use
This is a consumer electronics device. It may only be used for private use, not industrial
or commercial purposes.
Furthermore, the device may not be used outdoors or in tropical climates. Only connec-
tion cables and external devices may be used that comply with safety standards and the
electromagnetic compatibility and shielding quality of this device. This device fulfils all
that relates to CE Conformity, relevant norms and standards. Any modifications to the
equipment other than recommended changes by the manufacturer may lead to the re-
sult that these directives are not met any more. Only use the accessories recommended
by the manufacturer.
If you are not using the device within the Republic of Germany, you must observe the
regulations and laws in the country of use.
When connecting peripheral devices, make sure the cables are not too short and that
they don't force the connectors mechanically!
Use only the cart, stand, tripod bracket or table specified by the manufacturer or sold
with the product. When a cart is used, operate carefully to prevent the device from tip-
ping over.
Noise Abatement
•
According to international safety regulations the maximum permitted noise level is
00 dB.
•
Using the loudspeakers/headphones at a higher sound volume can damage your
hearing and cause nuisance to your surroundings. The output voltage on the HEAD
-
PHONE jack can be over 150 mV and up to 1.5 V.
It can therefore generate a
noise level that may damage your ears.
•
The sound may distract your attention under dangerous circumstances or prevent
you from being aware of what is happening around you.
•
Audio listening at high volume can harm the user’s auditory system.
•
The use of unsuitable sound sources, non-shielded cables, devices with incompat-
ible impedance values and improper signal level adjustments of the connected input
or output devices, as well as the mixing console, can lead to a higher audio output
signal and hearing damage.
CAUTION!
• High volume levels can harm the user’s auditory system and/or any connected
headphones or speakers.
• Turn all controls on the mixing console anti-clockwise to the minimum level
before powering it on.
• Always ensure that you set a suitable volume.
• For safety reasons, prior to connecting or putting on the headphones, always
double-check that the volume set on the mixing console will not harm your
ears.
CE Declaration of Conformity
This device has been tested and approved for compliance with the basic and other
relevant requirements of the EMC Directive 2004/108/EC, as well as the Low-voltage
Directive 2006/95/EC.
