TARGA TM-2100
English
7
4 TAPE IN (L, R) input jacks
These unbalanced Cinch inputs (also termed RCA jacks) serve to connect stereo sound
sources such as tape decks, CD players, etc. You can then adjust the signal level of
the connected sound sources via the
TAPE
control (30) of the master control panel and
listen to the mixing console.
5 REC OUT (L, R) output jacks
The mixed signal from the mixing console is delivered to this jack. Here you can con-
nect a suitable recording device to record the mixed signal. You can regulate the levels
to these jacks via the
MAIN L/R
control (27) of the master control panel.
6 CONTROL ROOM out (phone jacks)
These unbalanced Mono phone jacks are for listening to the mixed signals. Here, for ex-
ample, you can connect studio speakers. You can adjust the level of the mixed signals
to these jacks via the CTRL-R/PHONES control (28) of the master control panel.
7 (HEADPHONE) headphone out
This unbalanced stereo phone jack serves as the connection for headphones. You can
adjust the levels of the mixed signals to this jack via the
CTRL-R/PHONES
control (28)
of the master control panel.
8 MAIN OUTPUT stereo out (phone jacks)
These unbalanced Mono phone jacks are for the connection of external devices, such
as for example, amplifiers. You can adjust the levels of the mixed signals to these jacks
via the MAIN L/R control (27) of the master control panel.
9 EFX out (phone jacks)
This unbalanced Mono phone jack is for the connection of effect devices. Here you can
pick up the pre-mixed EFX signal that you have adjusted via the EFX control (20) of the
individual channels.
10 AUX-out (phone jacks)
This unbalanced Mono phone jack socket is for the connection of monitor equipment
and other devices. Here you can pick up the pre-mixed AUX signal that you have adjust
-
ed via the AUX control (19) of the individual channels and after processing through the
external device as required can again be fed in via the AUX RETURN jack sockets (3).
11 Phone jacks for channels 1,2, 3/4 and 5/6 (LINE-IN)
These balanced inputs 1 and 2 as well as the unbalanced inputs 3/4 and 5/6 are con
-
nectors for audio devices.
WARNING:
Never connect a microphone and another device at the same time to the
same input channel. For example, do not connect the microphone to the mic input ()
and the other device via a phone jack () of the same channel.
12 INSERT phone jacks
What's special about these phone jacks is that they are unbalanced and can be used as
inputs and outputs. Each of these jacks can be fed between the pre-amplifier and the
High Pass Filter of the relevant input channel.
