TARGA TM-2100
English
8
Alternatively they can be used to output these channels independently from each other
to devices such as graphic equalizers, compressors and noise filters. This is a TRS (Tip-
Ring-Sleeve) phone jack, that can be used bi-directionally.
WARNING:
To be able to connect devices to the INSERT jack you need a special cable.
This can be bought as an accessory from any dealer. The pin configuration is as follows:
13 Power adapter connector (AC ADAPTOR IN)
Here you connect the supplied power adapter.
IMPORTANT:
The plug must be secured into the jack. To do this, first plug in and gently
turn the outside metal ring clockwise till tight.
WARNING:
When operating your TARGA TM-2100 mixing console, use only the sup
-
plied adapter, and never use the adapter to feed other devices.
14 On/Standby switch (POWER ON/OFF)
Use this switch to power on the mixing console or to set it on power-saving Standby.
Output signal to external devices (tip)
Incoming signal from external devices (ring)
Shielding (earth)
(sleeve)
To input of external devices
From output of external
devices
WARNING!
The output signal is delivered reverse-phased to the INSERT jack. If you
connect to an external effects processor, this is no problem. However, if you connect an
external device, this can lead to phase shifting and signal interference.
Rear Panel
