EN-5
EN
1.3 Specifications
Operation System:
Integrated pre-programmed & learning
infrared remote control system
Compatibility:
Pre-programmed with code library of
Televisions (TVs), Video Cassette
Recorders (VCRs), Satellite/Digital
Satellite Receivers (SATs), C a b l e
Converters (CTVs), Laser Disc Players
(LDs), Compact Disc Players (CDs),
Digital Video Disc Players (DVDs)and
Integrated Amplifiers (AMPs)
Memory Capacity:
240 learning commands
Memory Retention
after battery
disconnection:
Non-volatile and permanent memory
Display Panel:
Monochrome touch screen LCD
Resolution:
320 x 80 pixels
EL Backlighting:
Blue-Green EL backlighting with light
sensor
Operating Distance: 10 Meters
Power Requirement: 4 x AAA size NiMH rechargeable
batteries
Charging Time:
About 17 hours
Dimensions:
220 x 51 x 25 mm
Weight :
165g (without batteries installed)
215g (with batteries installed)
Included Accessories: AC/DC power adaptor (
DC 9V, 400mA,
3.6VA
) x 1
Connector x 1 (for charging purpose)
4 x AAA NiMH size rechargeable
batteries
Docking Charger
PC Link software for MS Windows ME,
2000, XP
USB Cable
For improvement purposes, specifications and functions are subject
to change without prior notice.
1.4 Battery Installation and Charging
4 pcs AAA NiMH rechargeable batteries, a connector and
a power adaptor are included in the package. We
recommend that you charge the batteries for not less than
10 hours for the 1
st
time usage. When the battery meter “
” in top-left corner of LCD screen is empty “
”,
the batteries are weak. You should recharge the batteries.
To install the batteries,
open the battery cover,
follow the polarity symbol
shown in battery
compartment. Place the
batteries inside, then
replace the cover.
To recharge batteries, put
the power adaptor into AC
wall outlet, insert the DC
jack to the connector, then
connect to the socket at
the bottom of the remote.
It takes about 17 hours
maximum to fully charge
the batteries.
Remove the rubber
protector
Remove the charger by
tilting the connector upwards
