Targa PNA-E3530N, User Manual And Service Information

Page: 22 / 116

Powering the Device On/Off
Navigation Device PNA-E3530N 21
Introduction
2.8 Powering the Device On/Off
To power the device on for the first time, slide the main power switch [page 12,
item 7] into the
ON position.
On delivery, the battery of your navigation device is not fully
charged. Recharge the battery completely. The device can charge
the battery also while it's powered off.
2.8.1 Daily Use
To power the device off, press the On/Off button [page 12, item 1] briefly. The
navigation device will switch to standby mode. All entered information and
settings will be saved.
To power the device on again, press the On/Off button. The device will resume
power with the last opened application.
The device consumes electricity in the standby mode. Therefore it
can discharge the battery when in standby mode over a longer
period of time.
2.8.2 Powering Off Completely
To power the device off completely, slide the main power switch [page 12, item
7] into the
OFF position. This will not save any changes.
To make sure that all current information will be saved, we
recommend that you first power the device off by using the On/Off
button.