Targa PNA-E3530N, User Manual And Service Information

Page: 25 / 116

First-time Setup
24 English
Introduction
You can also open the Help at anytime after the First-Time Setup.
Read the operation notice and tap
I agree .
Upon delivery the device has several maps already installed.
When launching the device for the first time may it take a few minutes for
initialising. As soon as enough satellites have been found the
SiRFInstantFixII™ technology will start working (see also page 30). The next
time you power the device on, it will be ready much faster.
When launching the device for the first time will it take a few seconds for
initialising. As soon as this process is completed, the map with your current
position will be displayed.
In the case that no GPS signal is received (e.g. when you have
powered the device on inside a building) no position can be
tracked.
Please read the following pages to learn about the GPS technology and about
general operation for navigation purposes. A quick guide for programming your
first route can be found on page 33.