DO
completely read and understand the owner’s manual before operating, maintaining ore
repairing the Combination Dump Body/Spreader.
DO
completely inspect the unit before leaving the service garage.
DO
replace any worn or missing safety stickers immediately.
DO
insert the body props before going under the raised body for any reason.
DO
observe for any overhead obstructions prior to dumping.
DO
make sure the opening control of rear gate is in the closed position when truck is moving.
DO
make sure the truck is in a stable position on level ground before starting to lift the dump
body or floor.
DO
at all time be in control of the operation when out flowing.
DO
make sure the rear tailgate is free before starting to lift the dump body.
DO
make sure that when the dump body is not in operation, it is laying on the truck’s frame.
DO
use a spotter when backing.
DO
follow and obey ALL safety regulations.
5
Summary of Contents for T-3000
