03
See
item 7
Only TR2-P control
Press +
for 2 seconds
12 - Automatic
Presence Transmission
Only TR2-P control
See
item 7.2
See
item 9.7
Press
for 2 seconds
Press +
14 - HOME
13 - Range Test
Presence function
turn signals flash for 20 seconds. To
cancel, press the button
Activates the siren and the turn signals
flash for 45 seconds. To cancel, press the
button
Press for 2 seconds with
alarm on
5) Remote Control Functions:
FUNCTION
CONTROL ACTION
ALARM RESPONSE
1 - Turn alarm on
2 - Turn Alarm off
3 - Turn Alarm on
without a beep
4 - Turn Alarm off
without a beep
1 flash on Turn signals
3 Beeps indicate Open Door
Item 9.1
5 - Locate Vehicle
Press
Press
Press then
Press then
1 Flash on Turn 1 Siren beep3
Beeps indicate Open Door
Item 9.1
2 flashes on turn s 2 siren beeps
Note: 4 flashes on the turn 4 beeps,
indicate that there was a trigger when the
alarm was activated.
Item 12.1
2 flashes on turnsignals
Note: 4 flashes on the turn signals,
indicate that there was a trigger when
the alarm was activated.
Item 12.1
Press for 2 seconds with
alarm on
6 - Panic
1 Long beep, confirms ultrasound
c a n c e l l a t i o n a n d w i n d o w c l o s e
.Ultrasound operates again at next power
on.
Item 9.6
while the button is pressed, the alarm
generates a negative signal.
See
item 13
Stops the siren and turn signals. The
alarm continues to monitor.
Turn signals light for 10 seconds..
Item 9.5
Press for 2 seconds with
the alarm off
Press for 2 seconds with
the alarm off
Press with alarm
triggered
Press 2 times ( + )
Press then
for 2 seconds
10 -Auxiliary output,
use auxiliary module
11 - Auxiliary output 2
use auxiliary module
7 -Cancel Alarm
Activation
9 - Ultrasound Cancel
8 - Turning Signals