13
09
Attention:
Function canceled from factory, need to be enabled by Beep 8. In G4 alarms it is
possible to simultaneously enable the Beep 8 Secret Button Lock and the
Beep 7 Presence
Function.
Set Time for Locking, 1, 2 or 3 minutes
- The alarm will respond informing:
1 Beep
= Locks in
1 Minute
2 Beeps
= Locks in
2 Minutes
- With the door open, turn the ignition on.
3 Beeps
= Locks in
3 Minutes
- Hold the master pressed until beep 9.
To change it, press the Master key the number of times referring to the desired time.
Each time you press the Master, the alarm confirms with 1 beep. After turning off
the ignition, the alarm will confirm the new setting with beeps.
MASTER
+
+ +
IGNITION
ON
START
OFF
MASTER
DOOR OPEN
+
Configure
1X = 1 minute
2X = 2 minutes
3X = 3 minutes
Select the Beep 9 function
9) Alarm Functions:
7 HOME function TR2 and TR2-P control:
Through the HOME key on the TR2 and TR2-P
controls, it is possible to activate the gate operator or residential alarm, without having to
use an auxiliary module, only registering the control in the operator's central. The TR2 or
TR2-P control must be registered according to the manufacturer's instructions, as if it were
a control of the same brand as the gate or residential alarm.Compatible with CODE
LEARNING systems.
1 DOOR OPEN WARNING:
When turning the alarm on , if 3 BEEPs sound, it indicates that
there is an open door. Close it and turn the alarm back on. If it´s not solved, the alarm will
cancel the door monitoring. The rest will continue operating normally. If the problem
persists, look for a specialized service to repair the door switch.
2 SHUTDOWN - TRIGGERING LIMITER:
In case of violation, the alarm will trigger the SIREN
and flash the TURN SIGNALS for 45 seconds. 5 seconds later, it will go back to monitoring
the sensors. After 4 triggerings by the same sensor, it will be canceled, keeping the others
active. It will only be monitored again when the alarm is reset by the remote control.
3 AUTOMATIC LOCK:
About 8 seconds after turning the ignition on, the doors will be
locked and unlocked by turning the ignition off. It Will not lock if a door is open or if the
ignition is turned on before closing the door. It is possible to cancel the unlock when the
ignition is turned off,
.
itens 6.4 and 6.10
4 AUTOMATIC REACTIVATION:
Automatically turns the alarm back on after 60 seconds,
when turned off by the remote control and:
- Door, hood or trunk are not opened;
- Ultrasonic sensor does not detect movement. It is possible to disable,
item 6.5.
- Restart function will be canceled, when activating the function turn on remote alarm.
- Ignition is not turned on;
6 ULTRASOUND CANCEL:
When turning on the alarm canceling the ultrasound,
,
item 5.9
the power windows will not be closed. To close the windows and activate the ultrasound,
turn off and on the alarm using the remote control.
5 TURN SIGNALS:
The alarm times the turn signals for 10 seconds. Press the off button
on the remote twice, with the alarm off.
X
