20
Manual recharge
TO RECHARGE TONIGHT
– the unit can be programmed to recharge
at the next pre-programmed time, regardless of its remaining capacity.
Simply press the
TOUCH/HOLD
button
once. Recharge tonight will flash on
the display.
To cancel recharge tonight, press the
TOUCH/HOLD
button once and
immediately release. The display will
return to the time display.
TO RECHARGE NOW
– simply press the
TOUCH/HOLD BUTTON
and hold it down for approximately 3 seconds, until a beep sounds.
Recharge will flash on the display.
The process will take a few minutes
to begin and lasts approximately
1 hour. It cannot be cancelled
once started.
The water softener will automatically recharge when it needs to. The factory setting for the recharge is 2am. There may be occasions when
you need to do a manual recharge, for example more people staying in the home than usual.
NOTE: Use as little water as possible during a recharge as hard water will bypass the water softener.
Once the recharge is complete the recharge display will disappear.
Please Remember
– Only use tablet or pellet salt in your softener!
