Tapmatic effectivity tools DeBurr-Z, Safety And Operation Instructions

Page: 4 / 12

4
……................
by
Safety and Operation Instructions for
DeBurr - Z
TAPMATIC ⚫ 802 Clearwater Loop, Post Falls ID 83854
Tel. 800 854 - 6019 ⚫ Tel. 001 208 773 - 2951 ⚫ Fax 001 208 773 - 3021
info@tapmatic.com ⚫ www.tapmatic.com
Burr Cutting Tool Recommendations
Burrs made from High Speed Steel, or Carbide, with angular or spherical profiles are recommended. A
variety of tooth patterns are available from different manufacturers. The tooth pattern influences the
finish, and metal removal rate and some patterns may be designed to work best in certain types of
materials.
For spherical
profiles, to allow
axial floating,
please avoid
using the side of
the burr cutting
tool.
Please note that
the DeBurr - Z floats
only in compres-
sion and extension.
It does not com-
pensate in the radi-
al or angular direc-
tions. We recom-
mend a 90° includ-
ed angle for producing
a 45°chamfer.
Avoid using side of tool
55°
55°
Please note that the DeBurr - Z
floats only in compression and
extension. It is not able to climb
very abrupt, or steep contours.
Programming a Z axis movement is
needed when climbing steeper
incline surfaces
Please use caution to avoid
contacting the work piece with
the edge or side of the cutting
tool.
Select a Burr Cutting tool with an
included angle that avoids side
contact.