Tapmatic effectivity tools DeBurr-Z, Safety And Operation Instructions

Page: 11 / 12

11
……................
by
®
Installing the Cutting Tool:
TAPMATIC ⚫ 802 Clearwater Loop, Post Falls ID 83854
Tel. 800 854 - 6019 ⚫ Tel. 001 208 773 - 2951 ⚫ Fax 001 208 773 - 3021
info@tapmatic.com ⚫ www.tapmatic.com
Ident No. Description Part No.
1 Shank Cap 52219
2 O - Ring 2 - 014 70054
3 Screw 71162
4 Driver 522051
5 Key 74293
6 Spindle Ring 52224
7 1” Shank Housing 52210
7 20mm Shank Housing 522104
7 25mm Shank Housing 522103
8 Adjustment Traveler Left Hand 52203L
9 Adjustment Traveler Right Hand 52203R
10 Spring Washer (2 pcs) 52247
11 Spring (2 pcs) 52212
12 Threaded Sleeve 52207
13 O - Ring OR1002600 (3 pcs) 73654
14 Adjustment Sleeve Left Hand 52234L
15 Adjustment Sleeve Right Hand 52234
16 Nose Cone with Bushing 52236
17 O - Ring OR1501200 64359
18 Ident Sleeve 52206
19 O - Ring 30 x 2 52249
20 ER 11 Spindle 522351
21 M6 Adjustment Stop 52283
22 ER 11 Mini Nut 69318M
Keys, (Not Shown)
ER11 Wrench 69317M
7/16” by 9/32” Wrench 28002
2mm Hex Key 27222
3mm Hex Key 27223
Please order collets and burr cutting
tools separately.
Parts List
Safety and Operation Instructions for
DeBurr - Z
Incorrect
Correct
Always install the collet into the nut
first. Make sure lip inside the nut goes
into the collets groove.
Then thread
the nut on to
the holder.
Then slide in
the cutting tool
and tighten the
nut with the
wrenches.
Adjust M6 screw
with 3mm hex
key as a stop for
the cutting tool.