Tapmatic effectivity tools DeBurr-Z, Safety And Operation Instructions, Page: 7 / 12

7
Please note when programming a part for underside edge deburring,
it is best to program and begin cutting at the highest position.
……................
by
TAPMATIC ⚫ 802 Clearwater Loop, Post Falls ID 83854
Tel. 800 854 - 6019 ⚫ Tel. 001 208 773 - 2951 ⚫ Fax 001 208 773 - 3021
info@tapmatic.com ⚫ www.tapmatic.com
7mm
Ø8mm
Please note the total amount of
extension float is 10mm.
If there is a large amount of
height variation it will be nec-
essary to program the Z axis of
the machine to approximately
follow the contour of the part in
order to keep within the 10mm
extension limit.
6mm
Z0
Initial Clearance Position
Z = - Thickness - Clearance - L
Z = - 6 - 1 - 7
Z = Z - 14
Initial Deburring Plane
Z = - Thi Chamfer - L
Z = - 6 + 0.5 - 7
Z = Z - 12.5
7mm
Ø8mm
6mm
Example Underside Edge Deburring:
The work piece surface = Z0
D = 8 mm
L = 7 mm
Part thickness = 6mm
Clearance = 1 mm
Program Chamfer Depth = 0.5 mm
Z0
1mm
Safety and Operation Instructions for
DeBurr - Z
7mm
Ø8mm
6mm
Z0
0.5mm