Tapmatic effectivity tools DeBurr-Z, Safety And Operation Instructions, Page: 9 / 12

9
……................
by
TAPMATIC ⚫ 802 Clearwater Loop, Post Falls ID 83854
Tel. 800 854 - 6019 ⚫ Tel. 001 208 773 - 2951 ⚫ Fax 001 208 773 - 3021
info@tapmatic.com ⚫ www.tapmatic.com
Entering and exiting from the part:
When the deburring tool enters or exits the work piece to begin cutting, there can be a larger
edge break at these locations. This can be minimized in several ways.
For top edge deburring
enter and exit at the
lowest point.
For underside edge
deburring enter and
exit at the highest
point.
Always approach the part in a Z axis plane. If you move the cutter sideways into the part in the
X,Y axis plane, it will cut more material as it climbs onto the edge.
Z
X or Y
Select the best area to enter and exit the part when possible.
Safety and Operation Instructions for
DeBurr - Z
Z
Correct
Incorrect