Tapmatic effectivity tools DeBurr-Z, Safety And Operation Instructions, Page: 5 / 12

5
……................
by
Safety and Operation Instructions for
DeBurr - Z
TAPMATIC ⚫ 802 Clearwater Loop, Post Falls ID 83854
Tel. 800 854 - 6019 ⚫ Tel. 001 208 773 - 2951 ⚫ Fax 001 208 773 - 3021
info@tapmatic.com ⚫ www.tapmatic.com
Determine the programming diameter,
D , for your cutting tool, and measure
the distance from this diameter to the
point of the tool, dimension L .
L
ØD
Programming and Applications
Program Diameter and Point Length, Initial Clearance Plane and Deburring Plane:
The deburring tool can be programmed similarly to other types of milling tools. As a first step it is helpful
to determine a diameter for the area on the cutting tool you would like to use in the program and the
length to the end of the tool from this diameter.
L
ØD
Clearance
L
ØD
Chamfer
For Initial Clearance
Z = - L + Clearance
For Initial Deburring Plane
Z = - L - Chamfer
Work piece
surface
Determine the initial
clearance position.
Determine the initial
deburring plane.