1. PRODUCT DESCRIPTION
IOM manual
–
SG series
8
1.
Product description
1.1.
Intended use
The pumps are intended to operate either completely or partially submerged in the pumped
liquid. The pumps are constructed for particular applications. Do not use the pump on
applications different from that for which it was sold without consulting us to ascertain its
suitability.
WARNING:
➢
The pumps are not allowed to operate in explosive environments and used for
pumping flammable liquids.
➢
Do not use the pump for corrosive liquid.
1.2.
Pump design
Fluid
Type
Water with sand; residual water on the floor;
PH
6.5-8.5
Temperature
0 to 40
o
C
Pump
Type
Submersible
Impeller
Semi-open (cast iron)
Casing
NBR
Shaft seal
Double mechanical seal (Ceramic-SiC/Carbon-Ceramic)
Bearing
Sealed ball bearing
Motor
Type
Dry type submersible induction motor
Poles
2
Voltage
230V, 1ph (
±5%
continuous operation;
±10% intermittent
operation)
Frequency
50 Hz
Insulation
Class F
Motor protection
Circle thermal protector (build-in)
Lubricant
Turbine oil VG32
Sealings
O-rings
NBR
Gaskets
NBR
Max allowable pressure
See chapter
3.2 maximum allowable operating pressure
Discharge connection
Hose coupling
1.3.
Technical data
Model
Motor
power
Rated
current
Rated capacity
Rated
head
Max capacity
Max
head
Impeller
passage
kW
A
m
3
/h
l/min
m
m
3
/h
l/min
m
mm
SG2-04P
0.48
3
7
116
7
13
216
11.5
6
