0. GENERAL
IOM manual
–
SG series
7
Electrical connections
Electrical connections must be made by certified electricians in compliance with all
international, national, state, and local regulations. For more information about requirements,
see sections dealing specifically with electrical connections.
Hazardous liquids
Pumps are designed for pumping liquids that can be hazard to your health. In the event of
contact with the liquid follow national and local safety rules or MSDS (material safety
datasheet).
0.5.
Environmental safety
The work area
Always keep the station clean to spot oil leakage and avoid oil pollution.
Waste and emissions regulations
Observe these safety regulations regarding waste and emissions:
➢
Dispose appropriately of all waste.
➢
Handle and dispose of the processed liquid in compliance with applicable
environmental regulations.
➢
Clean all leakages in accordance with safety and environmental procedures.
➢
Report all environmental pollution to the appropriate authorities.
Electrical installation
For electrical installation recycling requirements, consult your local electric utility.
Recycling guidelines
Always recycle according to the guidelines listed below:
➢
Follow local laws and regulations regarding recycling if the pump or parts are accepted
by an authorized recycling company.
➢
If the first guideline is not applicable, then return the unit or parts to the nearest the
Tapflo representative.
0.6.
Qualification and training of personnel
The personnel in charge of installation, operation and maintenance of the pumps we produce
must be qualified to carry out the operations described in this manual. Tapflo shall not be held
responsible for the training level of personnel and for the fact that they are not fully aware of
the contents of this manual.
