P r o T r a x & M a x T r a x S a w T a b l e s
Trouble Shooting Your ProTrax and MaxTrax Saw Tables
Item # 11986
T4034-L 5/04
TAPCO PRODUCTS COMPANY
29797 Beck Road • Wixom, MI 48393-2834
2) Remove the set screw and tighten or loosen the
Lock Block to adjust the tension of the handle. Reach
under the center plate and hold it to keep it from
turning. Rotate the Lock Block 1/6 turn clockwise for a
tighter locking assembly, or 1/6 turn counter-clockwise
to loosen the tension. Be sure to reinsert the set screw
aligned with a flat on the shaft of the Lock Block once
the desired setting is achieved. Do not tighten the set
screw against the threaded portion of the shaft, or
damage will occur.
1) The locking block is preset at the factory. If the
handle is difficult to turn, remove the boom and
inspect the cam shaft and locking block to be
certain they are clean and properly lubricated.
Rotate the Lock Block 180 degrees and mount the
boom. If the handle is still difficult to turn, proceed
to step 2.
11
© Boral Building Products Inc.
