Tapco Port-O-Slitter, General Instructions, Set Up, Accessories And Manual To Using

Page: 8 / 8

ACCESSORIES
10387 B
T2025 4/02
Place male roll into grooves atop female roll.
Slide both onto shafts as one unit with the
male roll on top. Set provides 3 1/2 inches
of Net Free Area per foot on each pass of
material through slitter.
See page 2 for installation instructions.
See page 2 for installation instructions. Pinch rollers are installed onto 2 inch shafts,
one directly above the other and aid in pulling
materials through the slitter.
For slitting narrow strips of material, place
male roll into groove along the top area of the
female roll. Place the stripper into the lower
groove area. Slide onto shafts as one unit.
Place male roll into grooves atop female roll.
Slide both onto shafts as one unit with the
male roll on top. Set provides 3 1/2 inches
of Net Free Area per foot on each pass of
material through slitter. Place male roll into grooves atop female roll.
Slide both onto shafts as one unit with the
male roll on top. Set provides 3 1/2 inches of
Net Free Area per foot on each pass of
material through slitter.
GROOVED KNIFE SET
2" SHAFT
#11474
FOR VINYL
PERFORATING ROLLS
1 1 /
2
" SHAFT
(#11475)
2" SHAFT
(#11476)
FOR ALUMINUM
PERFORATING ROLLS
1
1
/
2
" SHAFT
(#11477)
2" SHAFT
(#11478)
HEAVY DUTY
PERFORATING ROLLS
2" SHAFT
(#11479)
SLITTER KNIFE
1 1 /
2
" SHAFT
(#11394)
FOR ALUMINUM AND VINYL
SLITTER KNIFE
2" SHAFT
(#11395)
NYLON PINCH ROLLERS
2" SHAFT
(#11405)
HEAVY DUTY
SLITTER KNIFE
2" SHAFT
(#11473)
For use with Slitter for soft metals. 3.08 O.D.
See page 2 for installation instructions.
SLITS
RIB-FORMS
PERFORATES
Optional knives are necessary
to perform some operations. Performing
all operations shown above at one time
is not recommended.
All sets include set screws.
silver silver
gold silver black silver silver silver
silver silver gold gold
TapcoTools.com • 800-521-7567
© Boral Building Products Inc.