19
LINK.USB FEATURES
Front Panel
1. INPUT GAIN Control
These knobs adjust the analog gain of the input signal (before the
A/D converters). They adjust the signal for both the mic and line inputs.
Turn the knob fully counter-clockwise to turn the signal off, and fully
clockwise to get the maximum gain.
2. LINE/INSTR Switch
If you are using a normal line-level input, leave this switch out. If you
are connecting an instrument like a guitar directly to the Link.USB, push
this switch in. It adjusts the input impedance of the 1/4" input to match
the high-output impedance of a guitar pickup.
3. MIX Control
This knob adjusts the signal going to your headphones and monitor
out. It allows you to blend the direct input signal with the USB signal
coming from your computer. In the fully counter-clockwise position, only
the USB signal is present in the headphones and monitors. As the MIX
knob is rotated clockwise, the input signal is added to the mix.
4. MON LEVEL Control
This adjusts the level of the rear panel MONITOR analog outputs. It
does not affect the headphone output.
Note:
Leave this knob turned down each time you turn on
your system, and then increase it to a safe listening volume.
MIX
PHONES
DIR
MAX
MAX
LEVEL
POWER
PHANTOM 48V
INPUT
1
INPUT
2
2 X 2 USB AUDIO INTERFACE
LINK.usb
MAX
GAIN
MON
LEVEL
MAX
LINE
INSTR
MAX
GAIN
LINE
INSTR
1
3
6
2
5
7
4
8
