20
5. PHONES LEVEL Control
This adjusts the level of the PHONES analog output on the front
panel. It does not affect the MONITOR output.
Note:
Make sure the PHONES LEVEL control is turned all
the way down before plugging in your headphones. This
will protect your hearing and prevent any loud surprises.
6. PHONES Jack
The PHONES jack accepts a 1/4" TRS stereo plug normally used on
headphones. If your headphones have a 1/8" mini-plug, you will need
a 1/8" to 1/4" stereo adapter, commonly sold in electronics and audio
stores.
The headphone signals are the same as the Monitor Output signals,
except the level is controlled by the PHONES LEVEL control instead of
the MON LEVEL control. (The Monitor outputs and the Phones output
are both affected by the MIX knob.)
7. PHANTOM 48V Indicator
This red LED lights up when the PHANTOM 48V switch [10] on the
rear panel is engaged.
8. POWER Indicator
The Link.USB is powered from the USB port. There is no power switch,
so this LED lights up whenever the Link.USB is connected to the USB port
on your computer (and the computer is powered on).
MIX
PHONES
DIR
MAX
MAX
LEVEL
POWER
PHANTOM 48V
INPUT
1
INPUT
2
2 X 2 USB AUDIO INTERFACE
LINK.usb
MAX
GAIN
MON
LEVEL
MAX
LINE
INSTR
MAX
GAIN
LINE
INSTR
1
3
6
2
5
7
4
8
