Safety Precautions
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Important Safeguards
1. Read Instructions
All the safety and operating instructions should be read before the appliance is operated.
2. Retain Instructions
The safety and operating instructions should be retained for future reference.
3. Cleaning
damp soft cloth for cleaning.
4. Attachments
Never add any attachments and/or equipment without the approva
l
of
the
manufacturer
as
such addition
may result in the risk of fire, electronic shock or other personal injury
5. Water and/or Moisture
Do not use this equipment near water or in contact with water.
6. Placing and Accessories
Do not place this equipment on an wall or ceiling that is not strong
enough
to
sustain
the
camera
.
The
equipment may fall, causing
serious
injury
to
a
child
or
adult, and serial damage to the equipment. Wall or
shelf mounting should follow the manufacturer's
instructions
,
and
should use a mounting kit approved by
by the
manufacturer
.
This equipment and cart combination should be moved with care.
Quick
stops
,
excessive
force
,
and
uneven surfaces may cause the equipment and cart combination to overturn.
Do not place this equipment
or lightning is common where the equipment is installed, use a surge protection device.
10. Overloading
Do not overload wall outlets and extension cords as this can result in
11. Objects and Liquids
Never push objects of any kind through openings of this equipment
voltage points or short out parts that
the equipment.
12. Servicing
Do not attempt to service this equipment yourself. Refer all servicing
13. Damage
R
equiring Service
Unplug this equipment from the wall outlet and refer servicing to
qualified
service
personal
under
the
following
conditions
:
A.
When the power-supply cord or the plug has been damaged.
B.
If liquid is spilled, or objects have hit the equipment.
C.
If the equipment has been exposed to rain or water.
D.
If the equipment does not operate normally by following the
controls that are covered by the operating instructions as an improper adjustment of other
controls may result in damage and will often require extensive work
by
a
qualified
technicial
to
to
restore
the
equipment
to
its
normal
operation
.
E.
If the equipment has been dropped, or the cabinet damaged.
Before installation reading this manual
1
Unplug this equipment from the wall outlet before cleaning it. Do not use liquid aerosol cleaners.
Use
a
7. Power Sources
This equipment should be operated only from the type of power
source
indicated
on
the
marking
label
.
If
you are not sure of the type of power, please consult your equipment dealer or local power company.
in
an
enclosed
space
.
sufficent
ventilation
is
required
to
prevent
an
ambient
temperature
which
can
cause
malfunction
or
the
risk
of
fire
.
You may want to install a UPS (Uninterruptible Power Supply)
prevent damage caused by an unexpected power stoppage. Any questions concerning UPS, consult
your UPS retailer.
system for safe operation in order to
8. Power Cord
Operator or installer must remove power and TNT connections before handling the equipment.
9. Lightning
For added protection for this equipment during a lightning storm,
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the equipment due to lightning
or when it is left unattended and
and power-line surges. If thunder
as they may touch dangerous
F. When the equipment exhibits a distinct change in performance — this indicates a need for service.
14. Replacement Parts
When replacement parts are required, be sure the service technician
has
used
replacement parts
specified by the manufacturer or that have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electronic shock or other hazards.
operating instructions, adjust only
15. Safety Check
Upon completion of any service or repairs to this equipment, ask the
checks to determine that the equipment is in proper operating condition.
service technician to perform
safety
2
