4
Configure Media
Streaming
Source Resolution:
Resolution of the sensor can be modified.The “Source
Resolution” change will take effect after restarting the system.
Stream ID:
Choose stream 1, can set the parameters of the main stream;
Choose stream 2, can set the parameters of the sub-stream.
Video Encode:
H264 High Profile,H264 Main Profile,H264 Base Line and
MJPEG can be chosen, default is H264 High Profile, also is the
best video encode.
Audio Encode:
G711_ALAW, G711_ULAW .
Bit Rate Type:
CBR maintains the current bitrate regardless of motion change
in the video;
VBR: Bitrate varies depending on motion change in the video.
Less movement places less load on the network and takes up less
storage space. LBR remains fixed bit rate on each frame.
View
Setup
Exit
IP
IP
Camera Web Service
Information
Account
Recording
Device I/O
PTZ
Alarm Trigger
Maintenance
Device Management
Streaming
Streaming
OSD
Image Resolution Setup
Source Resolution:
Streaming Setup
Save
Video system
ROI
1920x1080
Stream ID: Stream1
Video Encode: H264 High Profile
Audio Encode: G711
ULAW
Resolution: 1920x1080
I frame Interval: 90
(1-90) Frames
Frame Rate: 25
Bitrate Mode: VBR
Bitrate Limit: 8000
(200-12000kbps)
Quality:
(1-9)higher is better
6
Refresh
Save
Configure media
Multicast
Quality:
The higher quality, the better image quality, and the higher bit rate.
The range of 1-9, the typical default value is 6.
OSD:
OSD setting interface allows the user to set up all the context
character overlapping on the picture.
Streaming
OSD
Video System
ROI
Multicast
Streaming
Image Resolution Setup
Source Resolution:
Streaming Setup
Save
1920x1080
Stream ID: Stream1
Video Encode: H264 High Profile
Audio Encode: G711
ULAW
Resolution: 1920x1080
I frame Interval: 90
(1-90) Frames
Frame Rate: 25
Bitrate Mode: VBR
Bitrate Limit: 8000
(200-12000kbps)
Quality:
(1-9)higher is better
6
Refresh
Save
Basic Setup
Save
System Setup
User Setup 1
User Setup 2
User Setup 3
User Setup 4
User Setup 5
User Setup 6
Refresh
Streaming
OSD
Video system
ROI
Multicast
19
Camera Setup Instruction