Tannoy V12HP, Owner'S Manual

Page: 14 / 28

These slots allow the installer to easily and precisely adjust the distance between the loudspeaker and the mounting surface
for optimal discreet installation of the Tannoy V6.
Use the 20mm hole to pass the loudspeaker cable through before fixing the bracket to the wall.
Use the table of parts along with the
assembly drawing to assemble the V6Y.
ASSEMBLY VIEW
1
2
3
4
5
DESCRIPTION
Yoke Bracket
Washer M6 Plain
Washer M6 Spring
M6 x 25 Button Head Screw
Rubber Friction Washer
QUANTITY
1
2
2
2
2
10.2: SECUR ET: V8Y YOKE BRACKET
VCB2: The VCB2 cluster bar is available in both black and white finishes and provides a platform onto which 2 x Tannoy V6
loudspeakers can be mounted using the V6Y yoke bracket (not supplied in the VCB2 kit). A number of different loudspeaker
arrangements can be made depending on the application and the coverage pattern required (see figures 1 & 2).
Using the VCS ceiling saddle the resulting cluster can be attached to the ceiling.
VCB4: The VCB4 cluster bar (available in both black and white) provides the platform onto which 3-4 x Tannoy V6 loudspeakers
can be mounted using the V6Y yoke bracket (not supplied in the VCB4 kit). A number of different loudspeaker arrangements
can be made depending on the application and the coverage pattern required (see figures 3-6).
N.B. When using the VCB4 cluster bar system, one of the cluster bars is mounted above the other to produce a cross formation.
To ensure an equal mounting height, the 2 x Tannoy V6 loudspeakers being flown from the lower cluster bar should be attached
to the upper surface of this bar. While the 2 x Tannoy V6 loudspeakers being flown from the upper bar should be attached to
the underside of this cluster bar.
Using the VCS ceiling saddle the resulting cluster can be attached to the ceiling.
14