Tannoy Ellipse 8 iDP Owner'S Manual Download Page 12 | Manualshive

Page: 12 / 56

background image

Slave Monitor & Ellipse TS212 iDP

™

Subwoofer

}

The slave unit is able to receive and distribute audio and control data via the proprietary TC LINK connection

The Slave and Sub units contain one RJ45 Input connector and one Link connector. Via the RJ45 input connector the Slave
unit is supplied with audio and control data from the Master unit. Audio signal from the source is fed to the master monitor
only and the signal is distributed to the connected slave units through a proprietary networking protocol. A master monitor
acts exactly the same as a Slave monitor when its TC Link button is set to the “IN” position, hence it is used for audio inputs
only. The network system enables all connected monitors in a setup, whether in a stereo or surround format always to be
corresponding. Control of the entire system is possible from one point on the network (Master or Slave), providing great
flexibility in terms of control.

Initializing the Network

After connecting the units and powering up for the first time, the Master unit scans the setup in order to determine the
number of monitors connected. Each monitor is recognized via a unique serial number but can be renamed according to
task. After the initial scanning of the set-up, the Master unit will be re-scanning the setup every 5 seconds in order to
determine any change.

Remote Control

Ellipse iDP

™

monitor systems can be set up and controlled locally via the Master monitor’s user-interface with the optional

remote control or from a PC/Mac. This is achieved by connecting the PC or remote to any free Link connector in the network.
Control data is transmitted via the System Controller, and distributed to the other monitors in the network.

iDP SOFT

™

- Software Remote

Parameters in the network including setup parameters can be controlled via iDP SOFT

™

Additionally, any software upgrades

which become available can be installed with this package.

Hardware Remote

This remote control allows access to three user defined Reference level settings, recall of up to four presets, mute/un-mute
and solo function for each monitor, and Master level adjustment.

Ellipse iDP PC-iP

™

Optional software dedicated for the Advanced Installer. In addition to the common parameters the PC-iP

™

software offers

Parametric EQ and various Parameter Lock functions.

Slave Monitor Network Connections

12

«
...
10
11
12
13
14
...
»

Summary of Contents for Ellipse 8 iDP

























































Reviews:

No comments

Related manuals for Ellipse 8 iDP

Brand: dB Technologies Pages: 43

Brand: dB Technologies Pages: 148

Brand: DaytonAudio Pages: 2

Contractor Series

Brand: DaytonAudio Pages: 2

Brand: Audio Pole Pages: 4

Brand: Insignia Pages: 8

Brand: Q Acoustics Pages: 44

Brand: Beta Three Pages: 4

Brand: YORKVILLE Pages: 1

Brand: M&S Systems Pages: 2

Brand: HK Audio Pages: 64

Brand: EAW Pages: 1

Brand: Aiwa Pages: 4

Brand: Mark Pages: 12

DIGITAL DRIVE - REV G

Brand: Velodyne Pages: 50

Brand: Conrad Pages: 2

Brand: Ultimate Ears Pages: 2

StageFront Home Theater Solutions IW770FX

Brand: Niles Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands