37
iDP SOFT
™
(cont.)
Network
Accessing the Network Screen
Press the
(((•)))
icon in the Main screen to access the Network facilities. In this screen various global network settings are
handled.
Press
<AutoDetect>
to scan your COM ports. If an Ellipse iDP
™
System is connected to any port it will be recognized.
Note that the AutoDetect function will not executed until
<OK>
is pressed.
}
<Port>
Manual select of Serial/COM port.
}
<Status>
Indicates the status when entering the Network screen.
}
<Clear Network>
- Clear Setup for entire network
Select this reset procedure to clear all tasks and setup settings.
}
<Clear Settings>
- Clear Monitor Settings
All global and local parameters in connected monitors are reset. Preset and network settings are not affected.
}
<Reset to Factory Settings>
- Reset All Settings
A “factory” reset procedure that deletes all global and local parameter settings as well as preset and network settings.
<Upload Software to Monitors>
Software updates for the Ellipse iDP
™
Monitors comes as
(.syx)
files
There are various files for monitors and subs.
}
Save the .syx - file to a location on your hard drive prior to the uploading the file.
}
Press
Upload Software to Monitors
}
Follow the onscreen instructions
Summary of Contents for Ellipse 8 iDP
Page 1: ...Owners Manual TM ...
Page 2: ......
Page 48: ...48 Dimensions Ellipse TS212 iDP Grey Silver 520mm 20 47 490mm 19 29 498mm 19 6 ...
Page 55: ......
