26
②
Relay Unit Positioning
Remember to connect the AC adapter, place Relay Unit in desired position.
ch.1
ch.2
③
Remote Unit Positioning
Connect the sensor and position in the place that you wish to measure.
<RTR-
71
>
<RTR-
72
>
ch.1
ch.2
ch.1
ch.2
④
After positioning is completed, run the communication test again in the
same manner as before (
8
. Communication Test). If the results are all [OK],
all preparations are completed.
HELPFUL HINT
Even if no problem appears at set up, breaks in communication resulting in commu-
nication errors during auto download will sometimes occur later. You may have to
reposition the unit if problems persist.
Temperature Sensor
Temp/Humidity Sensor
AC Adapter
