23
⑨
After all settings have been completed click [Start Registration]
⑩
Upon completion the following box will appear. Click [OK]
⑪
The Remote Unit Registration screen will remain in the window to continue
registration of other units. Connect the next unit with the communication
cable and follow the same procedure. If you need to change groups,
you must close the Registration Window, return to the Main Window and
choose the desired group.
HELPFUL HINTS
In the Remote Unit Registration Window at the top the [Name of group to be registered in] will
appear.
After registration has been completed, the recording of data will begin automatically.
You can change a Remote Unit's Registration (See p
35
Change Remote Unit registration)
7
. Communication Test
A communication test should be run by Group to see if communication between
Remote, Relay and Base Units is occurring properly.
①
Connect Base Unit to computer with communication cable. In the
[Communication] menu, select [Wireless Communication Test].
②
Choose Testing Procedure. If you choose [Test Selected Remote Units]
remember to click the names of units you wish to test.
