T&D RTR-50, User Manual, Page: 99 / 122

90
Graph
Scale / Unit Conversion
It is possible to make settings for the conversion of units and scales for each channel of
downloaded data. This can be used when no conversion formula settings were made
before recording or when you wish to make changes to the conversion formula that was
set in the Scale Settings Display.
In the [Tools] Menu, select [Scale / Unit Conversion] to open the settings window.
Example of "[Designate by 2 points] Tab" display
Current conversion formulas and units
are displayed here. "y" indicates the
data after conversion, and "x"
indicates the voltage entering from the
sensor.
[OK] Button
[Return all Conversions]
Button
[Designate by y=ax+b] Tab
Conversion info
[Designate by 2 points] Tab
1.
Select to use 2 voltage points to convert the scale, by clicking on the [Convert
using 2 points] tab or use the simple conversion equation by clicking on the [Convert
with y=Ax+B] tab.
2.
Make settings for the conversion equation and unit.
3.
Click the [OK] button to fi nish the setting process. By clicking the [Return all
Conversions] button, the settings for all channels will return to those when the
dialog box was opened.