T&D RTR-50, User Manual, Page: 51 / 122

42
R
T
R-50 f
or
Windo
ws
Getting Relay Unit Current Status (Wireless Communication)
The Status of Relay Units which belong to the selected Relay Route will be gathered
and displayed here.
Relay Unit Number ----- The number of the Relay Unit will appear.
Radio Wave Strength -- The Radio Wave Strength between Units will appear.
(0 – Weak < 5 – Strong)
*This is the Radio Wave Strength for wireless communication
between a Relay Unit and the next Relay Unit with the
previous number (located closer to the computer) or between
the Relay Unit and the Base Unit.
Battery Level ------------- The remaining amount of battery power will be displayed for
the Relay Unit. (0 – No Battery < 5 – Full)
1.
From the Registration List, select the Relay Route that contains the Relay Units
from which you wish to get their Status.
2.
Select the [Get Current Status (Wireless)] tab and click the [Communicate] button.
[Communicate]
Button
[Get Current Status (Wireless)] Tab
Select the Relay Units
3.
The communication results will appear.
NOTE:
If a communication error has occurred, please check communication status by
carrying out the [Wireless Communication Test].
(See p.44 for details)