T&D RTR-50, User Manual, Page: 37 / 122

28
R
TR-50 f
or
Windo
ws
Remote Unit / Relay Unit Registration
Basic Procedure for Registration
1.
Connect an RTR-50 Unit with a USB or Serial communication cable to your
computer.
*The default setting for an RTR-50 unit is as a Base Unit.
For details about connecting the RTR-50 with a USB communication cable to your
computer see p.12.
For details about connecting the RTR-50 with a Serial communication cable to
your computer see p.21.
2.
Register Remote Unit Name and Group Name.
Register all Remote Units to be placed.
For details about registering units as Remote Unit(s) see p.31.
3.
Register Relay Unit Names and Relay Routes.
For details about Registering Relay Unit(s) see p.37.
NOTE:
There is no need to register a Relay Unit if there are no Relay Units between a
Remote Unit and the RTR-50 Base Unit. However, if communication cannot be
successfully carried out due to poor radio wave reception, please place Relay
Unit(s) between the Remote Unit and the Base Unit.