T&D RTR-50, User Manual, Page: 66 / 122

57
[Monitoring Interval] Button
It is possible to specify the monitoring interval.
Check [Monitor] and click the [Monitoring Interval] button to make monitoring interval
settings.
NOTE:
If you wish to set the monitoring interval in units of seconds, please assign a value of 20
seconds or higher, and if units of minutes, assign a value of 1 minute or higher.
Also please assign an interval time that is longer than communication time necessary for
the currently selected Remote Unit(s).
[Warning Settings]
When making upper and lower limit settings for Warning Report, select the Remote Unit
from the Monitoring Info List, select the unit of measurement, make a check next to
Ch.1 or Ch.2 and enter the desired values. Click the [Apply] button to save the settings.
[Warning Report Mail Settings] Button
When current readings have exceeded upper and lower limit settings, a warning report
mail can be sent. Check [Send a Warning Report Mail automatically if a Warning
occurs], and click [OK].
Make any necessary mail settings in the [Mail Settings] window.
*For details about Mail Settings, see p.63.