T&D RTR-50, User Manual, Page: 48 / 122

39
Connect a Remote Unit via Relay Unit
1.
From the Registration List, select the Remote Unit which you wish to connect to
the Base Unit via Relay Unit. Then drag the Remote Unit to the Relay Unit to
which you wish to connect and drop it.
2.
The message [Relay Settings for Selected Remote Completed] will appear and
the Remote Unit will be added under the location in the Relay Route in the
Registration List.
Removing a Remote Unit from a Relay Route
1.
Select the Remote Unit which you wish to remove from the Relay Route. Then
drag the Remote Unit to the Base Unit Icon and drop it.
2.
The location of the Remote Unit will be returned just under the Base Unit in the
Registration List.
*Also, by right clicking the mouse and then clicking on [No Relay], the location of the
Remote Unit will be returned to the Base Unit as above.