41
■
[Return to Original] Button
All info saved in the RTR-
57
C/
57
U will be erased and will be
returned to as it was when it left the factory: Group Name: Group
1
/
Remote Unit: NONE / Communication Frequency:
0
1
.
Connect the RTR-
57
C/
57
U unit you wish to return to the factory
settings.
2
.
Click the [Return to Original] Button, and the process will begin.
■
[Change/Delete] Button
You can make changes to a registered Remote Unit Name or delete
a Group or Remote Unit.
[Change] Button
[Delete Group] Button
[Delete Remote
Unit] Button
Group Name
Remote Unit
Number
Remote Unit
Name
[Change] Button
If a Remote Unit is placed on top of the Data Collector, the changes for the
selected info will be performed in both the Data Collector and the Remote
Unit. If no Remote Unit is on top of the Data Collector or no Remote unit can
be found, a confirmation message will appear after which the info will be
registered in the Data Collector only.
Note
- By sending, you will delete all prior registration contents.
- If the info is only registered in the Data Collector and no Remote Unit contains such
info (Group name, frequency channel, remote number are all not the same) wireless
communication cannot occur, so please be careful when registering units.
