5
Basic Procedures
NOTE:
- To make sure that the USB driver is properly installed, please follow the correct
procedure as outlined here.
■
USB Communication for Windows
7
/ Vista
/
2000
RTR-
57
U
Installing the provided software
see P.
9
-
11
Please follow the directions to install [T&D Recorder for Windows] .
▼
Connecting the Data Collector to the Computer
see P.
19
Enable communication by connecting the Data Collector to the computer with a USB
cable. Once the USB cable is connected, the USB driver will automatically be installed.
▼
Setting Up the COM Port
see P.
31
▼
Registering a Remote Unit
see P.
33
In order to communicate via Wireless Communication, it is first necessary to register the
data logger as a Remote Unit to an RTR-
57
U.
▼
Making Recording Start Settings
see [Basic Functions] for each type of device
NOTE:
- Before making [Record Start] Settings make sure that your computer clock settings
are correct. If your computer s clock is not correct, it will effect the date and time of
the recording start.
▼
Downloading Recorded Data
see [Basic Functions] for each type of device
Before downloading it is possible to make settings in the [Detailed Settings] to specify the
what kind of processing should be done with the data after downloading, i.e. open a Graph
or assign a file name and save.
NOTE:
- Before making Downloading Data make sure that your computer clock settings are
correct. If your computer s clock is not correct, it will effect the date and time of the
data being downloaded.
