APPENDIX
Integrating TANDBERG Precision HD Cameras with the
optional TANDBERG Video Switch
Up to two TANDBERG PHD Cameras can be integrated into this system (SCHOLAR MXP), using the TANDBERG Video Switch
(TVS), to provide high-definition video. The TVS enables the system to switch between the HD camera signals.
These cameras correspond to MAIN and AUX.
CAMERA OPTIONS
SOURCE INPUT
CAMERA DETECTED
USES TVS INPUT
CONTROL CONNECTION
CABLE
Camera #1
Precision HD
DVI-D #1
Via TVS “Data 1 HD”
115420 (6’) C6000
Camera #2
Precision HD
DVI-D #2
Direct via Display 2 breakout
Use adapter T278-0008
Camera #1
Camera #2, DVI 2 or RGB 5
Auxiliary #1, DVI 3 or RGB 6
Camera #1 Ctrl
To Codec Dataport 2
•
DVI Cabling: The DVI connections
to the TVS are Digital only (DVI-
D)
•
Power: Each camera and the TVS
will require a 12VDC power
supply.
•
TRC4 Remote Control: This
remote can be used but the
direct video input switch buttons
will not function correctly with
the TAM MXP.
TANDBERG recommends rack mounting the TVS within 6’ (1.5m) of the codec. If you have the TANDBERG student cart,
there is 1U blank panel above the codec, or on the 1U shelf. The power distribution bars behind the PC connection should
have adequate outlets available.
The TVS OUTPUT connects to the codec digital input on DATAPORT #2 replacing the existing Precision camera which now
connects to CAMERA 1.
CAMERA 1 (MAIN/STUDENT) connects to DVI-D 1 and control to DATA 1 HD
CAMERA 2 (AUX/INSTRUCTOR) connects to DVI-D 2 for the Precision HD Camera.
DISTANCE CONSIDERATIONS
If using the Precision HD camera as an instructor camera (looking at one specific person), it should be no further than 30’
(9m) from the subject due to the zoom capabilities of the camera.
CONNECTION DIAGRAM WITH TANDBERG VIDEO SWITCH
The schematic on the following page will show how the TVS is to be integrated with the TANDBERG Precision HD cameras.
Please note that the connections are different from the non-HD connection diagram (D5034602).
Page 31 of 32
TANDBERG SCHOLAR ASSEMBLY, SETUP AND USER GUIDE | D50564.01
Summary of Contents for Scholar MXP
Page 15: ...CONTROL WIRING DIAGRAM Page 15 of 32 TANDBERG SCHOLAR ASSEMBLY SETUP AND USER GUIDE D50564 01...
Page 16: ...AUDIO WIRING DIAGRAM Page 16 of 32 TANDBERG SCHOLAR ASSEMBLY SETUP AND USER GUIDE D50564 01...
Page 17: ...VIDEO WIRING DIAGRAM Page 17 of 32 TANDBERG SCHOLAR ASSEMBLY SETUP AND USER GUIDE D50564 01...
