TANDBERG Scholar MXP, Assembly, Setup & User Manual

Page: 28 / 32

MANUAL DIAL
When placing a call that is not in the directory, touch the MANUAL DIAL button to enter the required call information.
1. Enter the NUMBER or ADDRESS you wish to dial. You may enter any combination of alphanumeric* characters.
2. Enter any call options necessary:
3. Press CONNECT to dial the number.
When In a Call
When a call has been placed and connected, the system will display the MAIN PAGE. You can choose to:
ƒ
ƒ use the MAIN SOURCES to show
your content/presentation
ƒ
ƒ disconnect your call by touching
DISCONNECT
ƒ enhance your presentation with
dual streams (H.239) by touching
PRESENTATION
ƒ add additional sites for a MultiSite
videoconference call by touching
ADD SITES. (requires MultiSite
option to be installed).
MAIN SOURCES
Selecting a MAIN SOURCE will display the content on the system’s display:
STUDENT
CAM
Local view. The camera controls appear in the SOURCE
CONTROL area.
INSTRUCTOR
CAM
When a second camera is connected and configured, this
source and its controls will appear in the SOURCE CONTROL
area.
PC Presents the content that is presented using a computer
(PC/MAC/other) that is connected to the system. No controls are
available.
DOC CAM Presents the content that is presented using the document
camera configured for the system. The DOC CAM controls
specific for the device that is configured will appear in the
SOURCE CONTROL area.
DVD/VCR Presents the content that is presented through a VCR, DVD
player, or other A/V source connected to the system. The
controls specific to the VCR/DVD unit that is configured will
appear in the SOURCE CONTROL area. Any other A/V source will
not be controllable.
Page 28 of 32 TANDBERG SCHOLAR ASSEMBLY, SETUP AND USER GUIDE | D50564.01