TANDBERG E5714 DSNG Voyager, Reference Manual

Page: 37 / 314

Installing the Equipment
Reference Guide: E57xx DSNG and DENG Voyager Encoder Page 2-13
ST.RE.E10076.3
Figure 2.8: Equipment Connections for the Basic Unit
Do not move or install equipment whilst it is still attached to the mains
supply. Ensure ESD precautions are observed whilst interconnecting
equipment.
NOTE…
See Chapter 3 for information relating to Options and Upgrades.
2.6.3 Power Supply
Section 2.4, AC Mains Operating Voltage and Earthing provides details of
power supply connection, Protective earthing and safety. Read all the
instructions carefully and take note of all warnings and cautions.
2.6.4 Technical Earth
Connect the Encoder's Technical earth to a suitable point.
Encoder
Video Input
SDI IN
H SYNC
COMP VIDEO
Audio input
AES/EBU Reference
ETHERNET #1
ETHERNET #2
REMOTE CONTROL
Audio Input
Control
RS-232 data input
RS-422 data input
Alarm
DVB/ATSC Transport stream output
Output
Alarm
ASI OUT 1
ASI OUT 2
ASI OUT 3
ALARM
10BaseT
10BaseT
RS-232/RS-485
AUDIO IN
DVB/ATSC Transport stream output
DVB/ATSC Transport stream output
Serial Digital Interface
Analogue composite video
Studio Black and Burst
Data
RS-232 DATA
RS-422 DATA
Main Output
Modulator (IF)
[E5740-IF]
OUT MAIN
OUT MONITOR Monitor Output
L-Band In
Modulator (L-band)
[E5740-L Band]
L-BAND IN
L-BAND OUT MAIN
L-BAND OUT MONITOR
L-Band Monitor Output
L-Band Main Output